Filter
Top Products
Declaration of conformity
Declaration of Conformity
according to ISO/IEC 17050-1 and EN 17050-1
Manufacturer's Name: Hewlett-Packard Company
Manufacturer's Address: 11311 Chinden Boulevard,
Boise, Idaho 83714-1021, USA
declares, that the product
Product Name: HP LaserJet MFP Analog Fax Accessory
Regulatory Model Number:
2)
BOISB-0308-00
Product Numbers Q3701-60001, Q3701-60002, Q3701-60004
Product Options All
conforms to the following Product Specifications:
Safety: IEC 60950-1:2001 / EN60950-1: 2001 +A11
EMC:
CISPR22:1997 / EN55022:1998 - Class A
1)3)
EN 55024:1998 +A1:2001 +A2:2003
FCC Title 47 CFR, Part 15 Class A
3)
/ ICES-003, Issue 4
GB9254-1998, GB17625.1-1998 / CNS13438
Telecom: FCC Rules Part 68
TBR-21:1998
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive 2006/95/EC, the R&TTE
Directive 1999/5/EC (Annex II) and carries the CE-Marking
accordingly.
This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
Compliance testing of product to standard with exception of Clause 9.5, which is not yet in effect.
2) For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the product name
or the product number(s).
3) Warning: This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be
required to take adequate measures.
Boise, Idaho 83714-1021, USA
October 24th, 2007
For Regulatory Topics only, contact:
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard Gmbh,Department HQ-TRE / Standards
Europe, Herrenberger Straße 140, D-71034 Böblingen, Germany, (FAX: +49-7031-14-3143)
USA Contact: Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, Idaho 83707-0015, USA,
(Phone: 208-396-6000)
ENWW Declaration of conformity 129