Filter
Top Products
3. At the back of the device, remove the side cover by placing your fingers in the indented area and
sliding the cover off.
4. If necessary, remove the plastic fax-accessory cover from the formatter. Insert a coin into the
groove at the top of the cover, and use it to pry the cover away from the formatter.
5. Open the formatter-cage door by grasping the metal tab and pulling the door open.
6. If you are replacing an existing fax accessory, remove the old card from the formatter by pulling it
out of the slot.
7. Remove the new fax accessory from the antistatic pouch.
CAUTION: The fax accessory contains parts that are sensitive to electrostatic discharge (ESD).
When handling the fax accessory, use static protection such as a grounding wrist strap that is
connected to the metal frame of the device, or touch the metal frame of the device with your other
hand.
CAUTION: When handling the fax accessory, do not press the yellow component on the card.
Doing so can damage the card and cause a fax malfunction.
8. Align the two cutouts on the new fax accessory with the two fax-accessory guides on the formatter.
ENWW Installing the fax accessory 11