Filter
Top Products
16. Locate the phone cord that is included with the fax accessory kit. Connect one end of the phone
cord into the fax accessory phone jack that is on the formatter. Push the connector until you hear
a click.
Figure 1-42 Connecting the phone cord
17. Connect the other end of the phone cord into the phone jack on the wall. Push the connector until
you hear a click or until the connector is securely seated. Because there are different types of
connectors, depending on the country/region, the connector might make an audible click when
connected or might not make an audible click.
Installing/replacing the fax accessory in the HP LaserJet M9040 MFP / M9050
MFP
Use this procedure to install the analog fax accessory in the HP LaserJet M9040 MFP / M9050 MFP.
1. Slide the optional output device away from the print engine.
Figure 1-43 Sliding away the output device
2. Turn off the MFP, and then disconnect the power cord and all cables.
Figure 1-44 Turning the power off and disconnecting cables
ENWW Installing the fax accessory 31