Filter
Top Products
AutoTune 4-5
Quality Check When you run AutoJet manually, the software notifies you if
there are any jet or alignment problems so that they can be
addressed. When AutoTune runs AutoJet at scheduled intervals,
you can use the Quality Check feature to handle AutoJet errors.
When Quality Check is enabled, if any missing jets are found
that are not substituted by a working jet, the operator can be
alerted by the control panel or the job can be routed to the
Attention queue on the ColorSpan print server.
1. On the Front Page screen, press the (Menu) key to enter
the menu system.
2. Press the ) key repeatedly to highlight Printer Settings.
3. Press the (Menu In) key display the Printer Settings
menu.
4. Press the ) key repeatedly to highlight Quality Check.
5. Press ! (Proceed).
The control panel displays the Quality Check options.
◆ Attended Mode — user must press ! (Proceed) to
acknowledge the error and print the job (if one is pend-
ing), or (Cancel) to cancel printing.
◆ Unattended Mode — no user acknowledgment of errors
is required. When a quality check fails, print jobs are sent
to the ColorSpan print server’s Attention queue with a
disposition of “Uncalibrated Printer” (this feature may
not be supported by non-ColorSpan RIPs).
◆ OFF — no quality check is performed, all jobs will print.
6. Select a Quality Check option.
7. Press the (Menu Out) key repeatedly until the Front Page
screen is displayed. Press the Online/Offline button to return
the printer to the Ready state.