Filter
Top Products
Menu 2-15
◆ Printheads Procedures — see “Printhead Maintenance” on
page 5-8, for instructions on using the following options:
◆ Cleaning Solvent Soak — empties the printheads of all
ink, fills all heads with cleaning solvent, and prompts
you to cap the printheads.
◆ Prep for Storage/Shipping — empties the printheads of all
ink, fills all heads with cleaning solvent, then empties the
printheads, in preparation for long-term storage or ship-
ping.
◆ Load Ink in All Heads — runs the following three opera-
tions in sequence.
◆ Fill Heads with Solvent — fills the printheads with clean-
ing solvent.
◆ Fill Heads with Ink — fills the printheads with ink.
◆ Empty Heads (Fill With Air) — fills the printheads with
air.
Service Printer These tests are for factory, service, and technical support use.
User Diagnostics User Diagnostics presents an interactive troubleshooting pro-
gram to diagnose problems before calling MacDermid Color-
Span Technical Services. It walks you through a series of tests
and checks for certain printer functions. The printer asks you to
make observations or run simple tests to help it diagnose prob-
lems and suggest corrective actions. It has the following sec-
tions:
◆ Printhead Jet Statistics
◆ VideoNet Status
◆ VideoNet Connection
◆ Carriage Motion
◆ Calibration
◆ Vacuum Pressure
◆ Warnings and Actions List — table of all actions and warn-
ings with cause and recovery. This is an abbreviated version
of the table “Actions and Warnings” on page B-8.
◆ Error History
◆ Log Error History