Filter
Top Products
A-4 Specifications
Power cord Required power cord (supplied with printer):
North American (UL/CSA approved), length 8.2
feet (2.5 m), OR
European (Harmonized), length 8.2 feet (2.5 m)
Ventilation The printer uses solvent-based inks. The printer
does not include an integrated exhaust hood or
shielding for collecting the volatile organic com-
pound (VOC) emissions from the inks and
cleaning solvent. The owner is responsible for
ventilation and VOC recovery as required by
local regulations. Connection kits are available
from MacDermid ColorSpan to vent VOC emis-
sions to the customer’s exhaust system or VOC
recovery equipment. Consult your MacDermid
ColorSpan reseller for details.
The air surrounding the printer should be
changed every 1-3 minutes or as desired to
reduce or remove the solvent odor. The greater
the amount of printing, and the larger the room
in which the printer is located, the larger the
fan required to change the air at a given rate.
The space volume can be reduced with an
enclosure around the printer or by moving the
printer to a smaller room. Examples:
Cubic feet per minute (CFM) (typical) to
change the air in 3 minutes/1 minute:
Enclosure (4x10x6 feet): 80/240 CFM
Small Room (10x12x8 feet): 320/960 CFM
Medium Room (10x20x8 feet): 533/1600 CFM
Select a fan with a CFM rating at or greater than
the calculated CFM. The actual CFM required
will vary with local building and airflow condi-
tions.
Operating
Conditions
68–85° F (20–30° C)
20–80%, non-condensing
Approvals Safety: UL, c-UL, CE
Emissions: FCC-A, CE
Immunity: CE