Filter
Top Products
3-12 Loading Ink
Pause-Swapping Ink You can replace one or more ink boxes during a print by pausing
the printer:
1. On the printer control panel, press the
(Pause) key.
2. Remove the old profiler.
This signals to the printer that the ink box is being replaced.
3. Disconnect and remove the old ink box.
4. Install and connect the new ink box.
5. Install the profiler that was included with the new ink box.
The LED above the profiler blinks slowly while the printer
reads and verifies the profiler. The LED goes out after the
profiler has been verified as a valid profiler with ink remain-
ing.
6. Repeat steps 2 through 5 for any other ink boxes you want to
replace.
7. On the printer control panel, press the
(Resume) key.