Filter
Top Products
Manual Calibrations 4-17
12. When you are finished entering jet numbers, press the Esc
key.
The control panel displays the head selection message again.
13. Press , and ) to select the next head number, then press !
(Proceed).
14. Repeat steps 11 through 13 for each head containing bad jets
you want to clear.
15. When you are finished clearing bad jets, press (.
The control panel displays the previous menu.
View Current Bad Jets
When you select View Current Bad Jets, the control panel
displays the following prompt:
Head 1:
Press Proceed to view bad jets.
16. Press , and ) to select a head number, then press !
(Proceed).
The control panel displays a message that lists the bad jets by
number.
17. Press ! to return to the head selection screen.
18. Repeat steps 16 and 17 for each head you want to check for
bad jets.
19. When you are finished clearing bad jets, press (.
The control panel displays the previous menu.
Clear All Bad Jets
When you select Clear All Bad Jets, the control panel dis-
plays the following prompt:
Are you sure you want to clear
ALL reported bad jets?
◆ Press ( to cancel this function, or
◆ Press ! (Proceed). The control panel displays this
message:
Do you want to clear the hard bad jets?
◆ Press No to clear the soft bad jets only.
◆ Press Yes to clear both the hard and soft jets.