Filter
Top Products
Specifications A-3
Electrical Power Power used: 200-240VAC, 50/60 Hz, 14.8 Amps
Required electrical circuit:
220 VAC, 20 Amps, with NEMA L6-20R locking
wall receptacle (North America and Japan), OR
220 VAC, 16 Amps, single phase, with IEC 60309
wall receptacle (Europe)
North America: If your building receives power
from a standard three-phase supply, note that
the printer will use only two of the three
phases. This means that your building’s three-
phase power transformer may have an unbal-
anced load. Check with your electrician to verify
that your building has sufficient capacity for
this unbalanced load.
Optional auxiliary power for vacuum system:
Supplied 24 volt DC power supply with univer-
sal adapters, connected from the 24 VDC jack
on the vacuum/pressure assembly to either of
two options:
1. UPS — customer-supplied uninterruptible
power supply, output 100-240 VAC, 50/60 Hz,
minimum of 15 watts of power, provides bat-
tery backup to the vacuum system in the event
of a power failure.
2. Wall outlet — 100-240 VAC, 50/60 Hz, pro-
vides temporary power to the vacuum system
when it is necessary to power down the printer
for service.
NEMA L6-20R
locking wall receptacle
(North America/Japan)
IEC 60309
wall receptacle
(Europe)