Filter
Top Products
About this Guide
Equipment symbols
The following equipment symbols may be found on hardware to which this guide pertains.
They have the following meanings:
These symbols m
ark an enclosed surface or area of the equipment and indicate the presence of
electrical shock hazards. The enclosed area contains no operator serviceable parts
WARNING: To reduce the risk of personal injury from electrical shock hazards, do not
open this enclosure.
These symbols indicate that the marked RJ-45 receptacle is a network interface connection.
WARNING: To reduce the risk of electrical shock, fire, or damage to the equipment, do not
plug telephone or telecommunications connectors into this receptacle.
These symbols i
ndicate that the marked surface or area of equipment has a hot surface or hot
component. Contact with this surface could result in injury.
WARNING: To reduce the risk of personal injury from a hot component, allow the surface
to cool before touching.
These symbols mark power supplies and systems and indicate the presence of multiple
sources of power.
WARNING: To reduce the risk of personal injury from electrical shock, remove all power
cords to compl
etely disconnect power from the power supplies and systems.
These symbols indicate that the component exceeds the recommended weight for one
individual to
handle safely.
WARNING: To re
duce the risk of personal injury or damage to the equipment, observe local
occupational health and safety requirements and guidelines for manually handling material.
hp StorageWorks Enterprise Virtual Array Updating Product
Software Instructions
11