Filter
Top Products
Chapter 3. Upgrading the Enterprise Virtual Array to v3.020
Figure 3.53. Command View EVA—Enable Password Access to a Storage
System page
5. Select the World Wide Node Name of the storage system for which you want to enable
password access.
6.
Type the password in the Password and Confirm password fields.
Note
Make sure you use the same password you entered into the HSV controller OCP.
7.
Click Enable Password.
A message box displays.
8.
Click OK.
Command View EVA enables password access to the storage system.
hp StorageWorks Enterprise Virtual Array Updating Product
Software Instructions
83