A SERVICE OF

logo

Chapter 3. Upgrading the Enterprise Virtual Array to v3.020
Figure 3.48. Command View EVA—upgrade confirmation message
13.
Click OK to confirm that you have the proper licenses.
The new storage system software is loaded onto the HSV controllers, and the firmware on
the associated Fibre Channel drive enclosures is upgraded.
Note
For the VCS v3.020 upgrade, the drive firmware is located in a separate file. To upgrade the
drive enclosure firmw are, repeat step 3 through step 12 for the drive firmware.
During this process, a command in progress messa
ge displays.
Figure 3.49. Command View EVA—command in progress message
The Code Load Storage System-Page 3 displays. The HSV controllers restart.
hp StorageWorks Enterprise Virtual Array Updating Product
Software Instructions
79