Filter
Top Products
Chapter 3. Upgrading the Enterprise Virtual Array to v3.020
Note
The parameter Group is one of the groups listed by the -LG option. A user name can exist in
only one group.
To change a user password, execute this command:
UserAccountsManager -CP -U <UserName> -O <OldPassword>
-N <NewPassword>
where:
-U is the user name.
-O is the old password of the user.
-N is the new password for the user.
Example:
UserAccountsManager -CP -U Tom -O Vanilla2 -N Chocolate3
To remove a user, execute this command:
UserAccountsManager -DU -U <UserName>
where:
-U is the user name.
Example:
UserAccountsManager -DU -U Tom
For help, execute this command:
UserAccountsManager -h
where:
-h is help.
Configuring Event and Host Notifications
You can configure event and host notifications using the GUI of the hp StorageWorks Storage
Management Appliance software.
Configuring Event N otification
To configure the event notification, complete the following procedure:
1.
In the home page, select Devices.
The Devices page displays.
2.
Select command view area.
The HSV Storage Network Properties page displays.
3. In the left pane, select one of the subsystems of HSV Storage Network.
The Initialized Storage System Properties page displays.
hp StorageWorks Enterprise Virtual Array Updating Product
Software Instructions
93