Filter
Top Products
Chapter 3. Upgrading the Enterprise Virtual Array to v3.020
Step 5: Clearing the passwords on the HSV controllers
Estimated Time to Complete
15 minutes
If you are using passwords on your HSV controllers, you must clear the passwords, before
you upgrade Command View EVA. You can add passwords to your storage system after you
complete the Command View EVA upgrade (see Step 9: Adding passwords to the HSV
controllers (optional)). Use the following procedure to clear the storage system passwords
on the HSV controllers.
Note
When you clear a system password on the controller, you must disable password access from any
Command View EVA with access to this storage system.
Using the Operator Control Panel (OCP) on the HSV Controller:
1. Press
to leave the default display.
2. Press
four times to scroll to System Password.
3. Press
to select System Password.
4. Press
to display Clear Password
.
5. Press
to select Clear Password.
The OCP displays Clear Password No?
6. Press
.
The OCP displays CLEAR PASSWORD Yes?
7. Press
to clear the password.
The password is cleared. The system automatically returns to the default display
(WWID).
8. Disable password access to this storage system in Command View EVA.
Disabling password access in Command View EVA
Estimated Time to Complete
10 minutes
To disable password access to a storage system in Command View EVA, perform the
following steps:
1. Launch Command View EVA in your browser.
2.
Click Agent Options in the Session pane.
The Management Agent Options page displays.
48
hp Stor ageWorks Enterprise Virtual Array Updating Product
Software Instructions