Filter
Top Products
Chapter 3. Upgrading the Enterprise Virtual Array to v3.020
Step 9: Adding passwords to the HSV controllers (optional)
Estimated Time to Complete
15 minutes
Use the following procedure to add a password to the HSV controller pair.
Note
When you add a system passwor d to the controller, you must enable password access in the
Command View EVA with access to this system.
Using the OCP on the HSV controller:
1. Press
to leave the default display.
2. Press
four times to scroll to System Password.
3. Press
to select System Password.
4. Press
to display CHANGE PASSWORD? NO.
5. Press
to display CHANGE PASSWORD YES.
6. Press
to accept YES and go to step 7.
7. Press either
or to select an uppercase or lowercase character.
8. Press
to accept a character and select the next password character. The character
display changes to an asterisk.
9. Repeat step 7 and step 8 for the remaining seven characters.
10. Press
to accept the password.
The password is changed. The system automatically returns to the default display.
11. Enable password access to the storage system in Command View EVA.
Enabling password access in Command View EVA
Estimated Time to Complete
10 minutes
To enable password access to a storage system, perform the following steps:
1. Launch Command View EVA in your browser.
2.
Click Agent Options in the Session pane.
The Management Agent Options page displays.
3.
Click Storage system password access.
The Storage System Password Access page displays.
4.
Click Enable.
The Enable Password Access to a Storage System page displays.
82
hp Stor ageWorks Enterprise Virtual Array Updating Product
Software Instructions