Filter
Top Products
Chapter 3. Upgrading the Enterprise Virtual Array to v3.020
2. From a client computer, launch a Web browser and browse to the Storage Management
Appliance, using the following format:
http://<appliance_name>/
Note
The default appliance name for a Storage Managem ent Appliance (hardware version 1.0)
begins with
swma
and includes the last 6 characters of the appliance serial number.
If the Storage Management Appliance software was res
tored using the Quick Restore CD
v2.0, then the default appliance name begi ns with
sm
a
and includes all 12 characters of the
appliance serial number.
ThedefaultappliancenameforaStorageManagementApplianceIIbeginswith
sma
and
includes all 12 characters of the appliance serial number.
The default appliance name for a Storage Management Appliance III begins with
sma
and
includes all 10 characters of the appliance serial number
The serial number is displayed on a sticker which is usually pasted to the lower right side of
theappliance(whenviewedfromthefront).
3. Log in to the Storage Management Appliance software using a valid username and
password.
TheHomepagedisplays.
Note
You must
have administrator privileges.
Figure 3.21. Storage Management Appliance software—Home page
4.
Click Settings in the tool bar.
The Settings page displays.
52
hp Stor ageWorks Enterprise Virtual Array Updating Product
Software Instructions