Filter
Top Products
Chapter 3. Upgrading the Enterprise Virtual Array to v3.020
When the installation finishes, the Storage Management Appliance reboots and the
Storage Management Appliance software v2.1 starts up automatically.
Verifying the Storage Management Appliance Software version
1. From a client computer, launch a Web browser and browse to the Storage Management
Appliance, usi
ng the following format:
http://<appl
iance_name>/
Note
ThedefaultappliancenameforaStorageManagementAppliance(hardwareversion1.0)
begins with
swma
and includes the last 6 characters of the appliance serial number.
If the Storag
e Management Appliance software was restored using the Quick Restore CD
v2.0, then th
edefaultappliancenamebeginswith
sma
and includes all 12 characters of the
appliance serial number.
The default appliance name for a Storage Managem e nt Appliance II begins with
sma
and
includes all 12 characters of the appliance serial number.
ThedefaultappliancenameforaStorageManagementApplianceIIIbeginswith
sma
and
includes all 10 characters of the appliance serial number
The serial number is displayed on a sticker which is usually pasted to the lower right side of
theappliance(whenviewedfromthefront).
2. Log in to the Storage Management Appliance software using a valid username and
password.
Note
You must have adm inistrator privileges.
3.
Click Help in the tool bar.
The welcome page of online help for the Storage Management Appliance software
displays the current version of the software.
hp StorageWorks Enterprise Virtual Array Updating Product
Software Instructions
45