Filter
Top Products
Chapter 3. Upgrading the Enterprise Virtual Array to v3.020
Caution
IfyouhaveAuditorEventlogfilesthatarelargerthanthenewmaximumsizes,andyou
want to retain them, back up the logs before you upgrade the Storage Management
Appliance software from v2.0 to v2.1. The Storage Managem e nt Appliance software will
delete the log files if they e xceed the default maximum sizes.
Upgrading the Storage M anagement Appliance Software from v2.0 to v2.1
If you are running Storage Management Appliance software v1.0C, please refer to the
i
nstructions in the HP OpenView Storage Management Appliance Software Update Installation
Card.
If you are running Storage Management Appliance software v2.0 (or later), perform the
following steps to upgrade to v2.1:
Caution
You cannot update the Storage Management Appliance software using a Terminal Services
session. You must log in to the Storage Management Appliance software using a remote
br owser.
1. From a client computer, launch a Web browser and browse to the Storage Management
Appliance, using the following format:
http://<appliance_name>/
Note
ThedefaultappliancenameforaStorageManagementAppliance(hardwareversion1.0)
begins with
swma
and includes the last 6 characters of the appliance serial number.
If the Storage Management Appliance software was restored u
singtheQuickRestoreCD
v2.0, then the default appliance name begins with
sma
and in
cludes all 12 c haracters of the
appliance serial number.
The default appliance name for a Storage Managem e nt Appliance II begins with
sma
and
includes all 12 characters of the appliance serial number.
ThedefaultappliancenameforaStorageManagementApplianceIIIbeginswith
sma
and
includes all 10 characters of the appliance serial number
The serial number is displayed on a sticker which is usually pasted to the lower right side of
theappliance(whenviewedfromthefront).
2. Log in to the Storage Management Appliance software using a valid username and
password.
Note
You must have adm inistrator privileges.
3. Insert the Storage Management Appliance software v2.1 Update CD-ROM in to the
CD-ROM drive of the Storage Management Appliance.
4.
Click Settings in the
tool bar.
The Settings page displays.
hp StorageWorks Enterprise Virtual Array Updating Product
Software Instructions
41