Filter
Top Products
Chapter 3. Upgrading the Enterprise Virtual Array to v3.020
Step 2: Redeeming license keys
Estimated Time to Complete
1to48hours
Verify that you have the appropriate add-on licenses. See Required kits for more infor
mation.
Step 3: Upgrading the Storage Management Appliance
Estimated Time to Complete
1.5 to 2.5 hours
This section contains the following procedures:
• Changing the default maximum log size
• Upgrading the Storage Management Appliance Software from v2.0 to v2.1
• Verifying the Storage Management Appliance Sofrware version
You must upgrade the Storage Management Appliance software to v2.1. Please use the
Storage Management Appliance software v2.1 CD, and refer to the instructions in the HP
OpenView Storage Management Appliance Software Update Installation Card.
If the Storage Management Appliance is running Storage Management Appliance software
v1.0C or later, you can upgrade to Storage Management Appliance software v2.1. You do
not have to install any of the v2.0 service packs. Version 2.1 of the Storage Management
Appliance software includes all of the necessary components. Table 3.1 describes the proper
upgrade paths to Storage Management Appliance software v2.1.
Table 3.1. Storage Management Appliance Software Upgrade Paths
Current Storage Mana gement
ApplianceSoftwareVersion
Upgrade Path
Storage Management Appliance
software v1.0C
Storage Management Appliance
software v2.0
Storage Management Appliance
software v2.0, Service Pack1a
Storage Management Appliance
software v2.0, Service Pack 3
Storage Management Appliance
software v2.0, Service Pack 4
Upgrade directly to Storage
Management Appliance software
v2.1
Changing the d efault maximum log size
The default maximum log file size for the Storage Management Appliance software v2.1 is
16 MB for the Event log and 8 MB for the Audit log. Previously in v2.0, the maximum log file
size was 512 MB for both logs.
40
hp Stor ageWorks Enterprise Virtual Array Updating Product
Software Instructions