Disk drives
NOTE: The product has a hard disk drive (HDD) or solid state module (SSM) installed. If you install a
replacement disk drive, you must perform reload the product firmware. See
Reload the firmware
on page 85.
Before proceeding, remove the following components:
●
Formatter PCA. See
Formatter PCA on page 81
Remove the HDD
CAUTION: ESD sensitive component.
1. Place the formatter on a clean, flat, grounded surface.
2. Release the lcoking tab to release the HDD.
Figure 2-13 Remove the HDD (1 of 2)
82 Chapter 2 Removal and replacement ENWW