Table 3-21 General Settings menu (continued)
First level Second level Third level Fourth level Values Description
Fuser Temp Mode Normal*
Up
Down
If you are seeing a
faint image of the
page repeated at the
bottom of the page
or on the following
page, you should first
make sure the Paper
Type and Print Mode
settings are correct
for the type of paper
you are using. If you
continue to see ghost
images on your print
jobs, set the Fuser
Temp feature to one
of the Alternate
settings . Try the
Normal setting first
and see if it solves
the problem. If you
continue to see the
problem, try Up and
then Down. With
the Up and Down
settings you may see
an extra delay
between jobs.
Paper Curl Mode Normal*
Reduced
If excessive curling of
paper occurs in
warm, high-humidity
environments above
23° C (73° F), set
this feature to
Reduced. Using this
setting slows printing
and increases the
frequency of
consumable
replacements.
340 Chapter 3 Solve problems ENWW