Filter
Top Products
Table 3-23 General Print Settings menu (continued)
First level Second level Values Description
Personality Auto*
PCL
PS
PDF
Use this feature to configure the
default print language or
personality for the product.
Normally you should not change
the product language (the default
is Auto). If you change the
setting to a specific product
language, the product does not
automatically switch from one
language to another unless
specific software commands are
sent to it.
PCL Form Length Range: 5 – 128
Default = 60
Use this menu to control the PCL
print-command options. PCL is a
set of printer commands that
Hewlett-Packard developed to
provide access to printer
features.
Form Length
Use this feature to select the user-
soft default vertical form length.
The range is from 5 to 128 lines.
The factory default setting is 60
lines.
Orientation Portrait*
Landscape
Select the orientation that is most
often used for copy or scan
originals. Select Portrait if the
short edge is at the top or select
Landscape if the long edge is
at the top.
Font Source Internal*
Soft
USB <X>
Use this feature to select the font
source for the user-soft default
font. The factory default setting is
Internal. The list of available
options varies depending on the
installed product options.
Font Number Range: 0 – 999
Default = 0
Use this feature to specify the
font number for the user-soft
default font using the source that
is specified in the Font Source
menu item. The product assigns a
number to each font and lists it
on the PCL font list. The font
number appears in the Font #
column of the printout.
350 Chapter 3 Solve problems ENWW