Filter
Top Products
Table 3-21 General Settings menu (continued)
First level Second level Third level Fourth level Values Description
Line Voltage Normal*
Low Voltage
Enable this feature if
the product is
operating in a low
voltage environment
and you are having
problems with print
quality such as
blisters in the printed
image.
Tray 1 Normal*
Alternate
This feature affects
how often the
product performs an
internal cleaning
procedure. Set this
feature to Alternate
if you are having
problems with extra
toner on pages. The
product performs the
cleaning procedure
after each job that is
printed from Tray 1.
Using this mode
increases wear on all
the print cartridges.
Background Normal*
Alternate 1
Alternate 2
Alternate 3
Use this setting if
pages are printing
with a shaded
background. Using
this feature might
reduce gloss levels.
The default setting is
Normal. Use the
Alternate 1 setting
if you are seeing a
shaded background
on the entire page.
Use the Alternate 2
setting if you are
seeing thin vertical
lines on the
background. The
Alternate 3 setting
applies the
Alternate 1 and
Alternate 2 settings
at the same time. Use
this setting if the first
two settings do not
correct the problem.
342 Chapter 3 Solve problems ENWW