Filter
Top Products
Trays menu
In the following table, asterisks (*) indicate the factory default setting.
Table 3-19 Trays menu
First level Second level Values Description
Manage Trays Use Requested Tray Exclusively*
First
The product automatically
prompts you to configure a tray
for paper type and size in the
following situations:
●
When you load paper into
the tray
●
When you specify a
particular tray or media
type for a print job through
the printer driver or a
software program and the
tray is not configured to
match the print-job’s settings
NOTE: The prompt does not
appear if you are printing from
Tray 1, and it is configured for
the Any Size and Any Type
settings. In this situation, if the
print job does not specify a tray,
the product prints from Tray 1,
even if the paper size and type
settings in the print job do not
match the paper loaded in Tray
1.
You can configure the trays for
type and size without a prompt
from the product.
NOTE: Labels on each tray
indicate the correct way to load
paper. If you change the size or
type of paper that is loaded in
the tray, you need to configure
the tray for the new size or type.
NOTE: Before using any
paper, verify that it is of good
quality and is free of cuts, nicks,
tears, spots, loose particles, dust,
wrinkles, curls, or bent corners.
324 Chapter 3 Solve problems ENWW