Filter
Top Products
Table 3-27 Manage Trays menu (continued)
First level Values Description
Use Another Tray Enabled*
Disabled
Use this feature to turn on or off the control-
panel prompt to select another tray when the
specified tray is empty. Two options are
available:
●
Enabled: When this option is selected,
the user is prompted either to add
paper to the selected tray or to choose
a different tray. This is the factory
default setting.
●
Disabled: When this option is
selected, the user is not given the option
of selecting a different tray. The product
prompts the user to add paper to the
tray that was initially selected.
Alternative Letterhead Mode Disabled*
Enabled
Use this feature so that you can load
letterhead or preprinted paper into the tray
the same way for all print jobs, whether you
are printing to one side of the sheet or to
both sides of the sheet. When this option is
selected, load the paper as you would for
printing on both sides. See the user
documentation that came with the product for
instructions about loading letterhead for
printing on both sides. When this option is
selected, the product speed slows to the
speed required for printing on both sides.
Blank Pages Auto*
Yes
Override A4/Letter Yes*
No
Use this feature to print on letter-size paper
when an A4 job is sent but no A4-size paper
is loaded in the product (or to print on A4
paper when a letter-size job is sent but no
letter-size paper is loaded). This option will
also override A3 with ledger-size paper and
ledger with A3-size paper. Select Yes to
enable this option. This is the factory default
setting. Select No to disable this option.
364 Chapter 3 Solve problems ENWW