Filter
Top Products
Recommended action
To perform the test, remove at least one print cartridge. To cancel the test, press the Stop button
.
To exit press
Remove shipping lock from Tray 2
Description
The Tray 2 shipping lock was not removed before you turned the product on.
Recommended action
Open Tray 2, and then remove the shipping lock.
Replace <supply>
Description
This alert appears only if the product is configured to stop when a supply reaches the very low
threshold. The product indicates when a supply level is at its estimated end of life. The actual life
remaining might be different than estimated.
The supply does not need to be replaced now unless the print quality is no longer acceptable.
HP recommends that the customer have a replacement supply available to install when print quality is
no longer acceptable.
The product can be configured to stop when the supply level is very low. The supply might still be able
to produce acceptable print quality.
NOTE: When an HP supply has reached its approximated end of life, the HP Premium Protection
Warranty on that supply ends.
◦
10.00.70 (event code)
Black print cartridge
◦
10.01.70 (event code)
Cyan print cartridge
◦
10.02.70 (event code)
Magenta print cartridge
◦
10.03.70 (event code)
Yellow print cartridge
◦
10.23.70 (event code)
Fuser Kit
◦
10.31.70 (event code)
ENWW
Tools for troubleshooting
459