Drum Speed Adjustment Image not found
◦
47.FC.33 (event code)
Drum Speed Adjustment Print engine execution failure
◦
47.FC.40 (event code)
Pulse Width Modulation Image not found at system initializatione
◦
47.FC.41 (event code)
Pulse Width Modulation Store image failure
◦
47.FC.42 (event code)
Pulse Width Modulation Image not found
◦
47.FC.430 (event code)
Pulse Width Modulation Print engine execution failure
Recommended action
Turn the product off, and then on.
If the error persists, reload the firmware.
49.XX.YY To continue, turn off then on
Description
A firmware error has occurred.
Recommended action
1. Turn the product off, and then on.
2. If the error returns, check the following:
●
The error might be caused by a network connectivity problem.
●
Damaged interface cable
●
Damaged USB port
●
Invalid network configuration setting
●
The error might be caused by the print job.
●
Invalid print driver
●
problem with the software application
●
Problem with the file
3. If the error persists, perform a firmware upgrade.
420 Chapter 3 Solve problems ENWW