Table 3-29 Jetdirect Menu (continued)
First level Second level Third level Fourth level Fifth level Values Description
IPv4 Settings Config
Method
Bootp*
DHCP
Auto IP
Manual
Specifies the
method that TCP/
IPv4 parameters
will be configured
on the HP Jetdirect
print server.
Use Bootp
(Bootstrap
Protocol) for
automatic
configuration from
a BootP server.
Use DHCP
(Dynamic Host
Configuration
Protocol) for
automatic
configuration from
a DHCPv4 server.
If selected and a
DHCP lease
exists, DHCP
Release and
DHCP Renew
menus are
available to set
DHCP lease
options.
Use Auto IP for
automatic link-
local IPv4
addressing. An
address in the
form 169.254.x.x
is assigned
automatically.
If you set this
option to
Manual, use the
Manual
Settings menu to
configure TCP/
IPv4 parameters.
366 Chapter 3 Solve problems ENWW