Filter
Top Products
1-4 Product Information
OPTIONS
PLUG-IN MEMORY
C2858/9A DesignJet 650C plotters have two memory expansion sockets. Each can hold ei-
ther a four-megabyte or eight-megabyte, Single In-line Memory Module (SIMM). There-
fore, memory can be expanded by 4, 8, 12 or 16 megabytes. The SIMM part numbers are:
Four Mbyte SIMM = P/N C2065A
Eight Mbyte SIMM = P/N C2066A
ROM ENHANCEMENT MODULES
Two ROM expansion sockets are also provided in the C2858/9A DesignJet 650C plotters.
Each will hold a single ROM enhancement SIMM. The ROM SIMMS could include firm-
ware revision upgrades or language enhancements. A Kanji ROM SIMM is available for Jap-
anese users who require the Kanji character sets. A PostScript upgrade is also available in
ROM SIMM. The part numbers for the kits are:
Kanji ROM Kit = P/N C2847-60031
PostScript ROM Kit = P/N C2882A
MODULAR INPUT/OUTPUT (MIO) PCAs
Interface circuitry is provided on the plotters which allows the user to install HP supported
modular I/O (MIO) cards for several interface applications. Although multiple protocols
may reside on an MIO, they are not simultaneously supported, only one protocol at at time
can be used. The MIO card part numbers are:
Multi-protocol Ethernet for Novell, TCP/IP, LAN Manager, Ethertalk
with RJ-45 (twisted pair) and BNC (ThinLAN) connectors) = P/N J2372A
with RJ-45 (twisted pair) connector only = P/N J2371A
Multi-protocol Token Ring for Novell, LAN Manager = P/N J2373A
HP-IB = P/N C1642A
Apple LocalTalk = P/N J2341A