Filter
Top Products
3-19Installation and Configuration
Action buttons:
Cancel Form Feed/Cut Access Pens
Cancel stops current
operation (plotting,
accuracy calibration,
pen alignment and
media loading).
Form Feed/Cut advances the page and,
if roll media, cuts it.
Access Pens brings the pen carriage out to the
plotting area for pen access. (Plotter window
must be closed).
Pause
Pause stops plotter after
plotting current drawing.
Press again to continue.
To select and confirm a menu option, do the following:
1. Press the Enter button to move from the ªStatusº display to the menu structure.
2. Press either the up ( = ) or down ( O) arrow button to review the options at the current
menu level.
3. When the menu or option you want is displayed, press the Enter button.
4. Repeat from step 2 to reach the next level or sublevel of options you want to set.
Note
Many menus contain subgroups of plotter options. Pressing Enter then dis-
plays the next level of options. When you have reached the final level of
your option, pressing Enter confirms your menu selection or value. In many
instances, your choice is saved in the plotter’s continuous memory. This
means it is not erased or reset when you turn OFF the plotter.
To exit to a previous menu, press the Previous button. Continuous pressing of the Previous
button will move you to higher levels of the menu structure until you reach the ªStatus’ dis-
play. If you are in a menu that has variables, pressing Previous returns you to the previous
menu without changing any values or without saving any menu changes. You can confirm
menu changes only by pressing Enter.