Filter
Top Products
7-27
Advanced Concepts
IP Multicast (IGMP)
Advanced Concepts
Note If you move a port from one VLAN to another, that port will retain its IP
multicast (IP Mcast) parameter setting. For example, suppose port 1 is in
DEFAULT_VLAN with an IP Mcast setting of “Blocked”. If you create another
VLAN named VLAN2 and then move port 1 to VLAN2, the IP Mcast setting will
remain the same (Blocked).
To Configure IGMP. Use this procedure to configure or edit the IGMP
settings for a switch or VLAN.
1. Beginning at the Main Menu, select Configuration to display the
Configuration menu.
Figure 7-15. The IGMP Option in the Configuration Menu
2. Select IP Multicast (IGMP) Service.
3. If VLANs are configured, select the VLAN in which you want to configure
IGMP and press [E] (for E
dit). You will then see a screen similar to the
following:
IGMP Option
SEDONA.BK : sed_7.fm5 Page 27 Thursday, February 27, 1997 10:11 AM