Filter
Top Products
3-8
Configuring the Switch
Configurable Features
Configuring the Switch
(Optional) How To Configure IPX for Management from a Remote IPX
Network. In the factory default, IPX is already enabled. If you want to
enable management from a remote IPX network, you must configure the
gateway encapsulation type and gateway node.
1. From the Configuration screen, select IPX Service to display the above
screen.
2. If the IPX Enabled parameter is not already set to “Yes” (the factory
default), then select this parameter and press the Space bar to select Yes.
3. Select the Gateway Encap field and use the Space bar to select the
appropriate gateway encapsulation for the gateway device.
4. Press [v] to display and select the Gateway Node field.
5. Type the IPX node address (MAC address) of the gateway device that is
using the encapsulation defined in step 3.
6. Press [Enter], then [S] (for S
ave).
7. Return to the Main Menu and reboot the switch.
SEDONA.BK : sed_3.fm5 Page 8 Thursday, February 27, 1997 10:11 AM