Filter
Top Products
2-12
Using the Console Interface
Resetting the Switch
Using the Console Interface
Resetting the Switch
Resetting requires physical access to the front of the Switch 800T. There are
two levels of reset:
■ Hardware reset: Momentarily interrupts switch operation, performs a
complete hardware self-test. This also clears the Event Log.
■ Configuration reset: This is a drastic action that interrupts switch
operation, clears any passwords, clears the event log, performs a com-
plete self-test, and reboots the switch in its factory default configuration.
You should consider performing a configuration reset only if you want all
configurable parameters reset to the factory default values.
To perform a hardware or configuration reset: Refer to the table on page
D-5 in appendix D, “Switch Reference”.
SEDONA.BK : sed_2.fm5 Page 12 Thursday, February 27, 1997 10:11 AM