Filter
Top Products
7-35
Advanced Concepts
Automatic Broadcast Control (ABC)
Advanced Concepts
arrow key to display the remaining ABC parameters. (If VLANs are
configured, these parameters already appear.) Then do one of the follow-
ing:
• If you enabled ABC for IP_IPX and pressed an arrow key (figure 7-20,
below):
Figure 7-20. ABC Enabled With Default IP_IPX Option (No VLANs Configured)
i. If you want IP RIP broadcast control, then select the IP RIP
Control parameter and use the Space bar to select Yes.
ii. If you want IPX RIP/SAP broadcast control, select the IPX RIP/
SAP Control parameter and use the Space bar to select Yes.
iii. If you want to specify a different global broadcast limit for the
switch or selected VLAN (if VLANs are configured), select the
Bcast Limit parameter and type a value from 0 to 99. (A “0”
disables broadcast limits; 40 is the default setting.)
iv. Go to step 7 on page 7-37.
Note The broadcast limit (Bcast Limit) parameter in the ABC screen sets a global
broadcast limit value for all ports in the switch or selected VLAN (if VLANs
are configured). If you want to set broadcast limits on a per-port basis, you
Note: This is the screen
layout when no VLANs are
configured. The screen has
a different appearance if
VLANs are configured.
SEDONA.BK : sed_7.fm5 Page 35 Thursday, February 27, 1997 10:11 AM