Filter
Top Products
7-29
Advanced Concepts
IP Multicast (IGMP)
Advanced Concepts
Changing the Querier Configuration Setting.. The Querier feature, by
default, is enabled and in most cases should be left in this setting. If you need
to change the querier setting, you can do so using the IGMP Configuration
MIB. To disable the querier setting, select the Advanced Command prompt
from the Main Menu and enter this command:
setmib hpSwitchIgmpQuerierState.<vlan number> -i 2
To enable the querier setting, select the Advanced Command prompt from the
Main Menu and enter this command:
setmib hpSwitchIgmpQuerierState.<vlan number> -i 1
To view the current querier setting, select the Advanced Command prompt
from the Main Menu and enter this command:
getmib hpSwitchIgmpQuerierState.<vlan number>
where:
<vlan number> is the sequential (index) number of the specific VLAN. If no
VLANs are configured, use “1”. For example:
getmib hpSwitchIgmpQuerierState.1
SEDONA.BK : sed_7.fm5 Page 29 Thursday, February 27, 1997 10:11 AM