Filter
Top Products
4-8
Monitoring and Analyzing Switch Operation from the Console
Status and Counters Menu
Monitoring and Analyzing
Switch Operation from the
Port Address Table
This screen lets you easily determine which devices are attached to the
selected switch port by listing all of the MAC addresses detected on that port.
You can use the S
earch action at the bottom of the screen to determine
whether a specific device (MAC address) is connected to the selected port.
To use the port address table:
1. Select Port Address Table from the menu in the Status and Counters
screen.
Figure 4-7. Example of How To Access the Port Address Table
2. When the Select Port prompt appears, press the Space bar to display
the port you want to examine, then press [Enter]. (See figure 4-7, above.)
Each port is identified by the sequential port numbers on the front of the
switch.
Use the Space bar to select the port for
which you want to display the address table.
SEDONA.BK : sed_4.fm5 Page 8 Thursday, February 27, 1997 10:11 AM