Load an original on the scanner glass
You can copy, scan, or fax up to letter- or A4-size originals by loading them on the
glass.
NOTE: Many of the special features will not work correctly if the glass and lid
backing are not clean. For more information, see
Clean the device.
To load an original on the scanner glass
1. Lift the scanner lid.
2. Load your original print side down in the right front corner of the glass.
TIP: For more help on loading an original, refer to the guide along the edge of
the glass.
3. Close the lid.
Load an original in the automatic document feeder (ADF)
You can copy, scan, or fax a one-sided, single- or multiple-page, A4- or letter-size
document by placing it in the document feeder tray.
CAUTION: Do not load photos in the ADF; this might cause damage to your
photos.
NOTE: Some features, such as the Fit to Page copy feature, do not work when
you load your originals in the ADF. You must load your originals on the glass.
The document feeder tray holds a maximum of 50 sheets of plain paper.
To load an original in the document feeder tray
1. Load your original, with the print side up, into the document feeder tray. Place the
pages so that the top edge of the document goes in first. Slide the media into the
Chapter 2
16 Use the device