HP (Hewlett-Packard) J4580 All in One Printer User Manual


 
4 Copy
You can produce high-quality color and grayscale copies on a variety of paper types
and sizes.
NOTE: Copying from the HP photo and imaging software is only available on the
Mac OS.
NOTE: If you are copying a document when a fax arrives, the fax is stored in the
device memory until the copying finishes. This can reduce the number of fax pages
stored in memory.
This section contains the following topics:
Make copies from the device control panel
Change the copy settings
Set the number of copies
Set the copy paper size
Set the copy paper type
Change copy speed or quality
Resize an original to fit onto letter or A4 paper
Copy a legal-size document onto letter paper
Adjust the lightness and darkness of your copy
Enhance blurred areas of your copy
Enhance light areas of your copy
Cancel a copy job
Make copies from the device control panel
You can make quality copies from the device control panel.
To make a copy from the device control panel
1. Make sure you have paper loaded in the main tray.
2. Place your original face down on the scanner glass. For more information, see
Load originals.
3. Use the left arrow
or right arrow to select one of the following functions:
Copy B&W: To select a black-and-white copy job.
Copy Color: To select a color copy job.
NOTE: If you have a color original, selecting the Copy B&W function
produces a black-and-white copy of the color original, while selecting the Copy
Color function produces a full-color copy of the color original.
4. Press OK.
5. Press Start.
30 Copy