Filter
Top Products
Performance problems
Problem Cause Solution
No copy came out. The input tray might be empty. Load media in the device. SeeLoad
media into the input trays for more
information.
The original might have been loaded
incorrectly.
Load the original correctly in the ADF or
flatbed scanner. See
Load media into the
input trays.
Copies are blank. The sealing tape might not have been
removed from the print cartridge.
Remove the print cartridge from the
device, pull out the sealing tape, and
then reinstall the print cartridge.
The original might have been loaded
incorrectly.
Load the original correctly in the ADF or
flatbed scanner. See
Load media into the
input trays.
The media might not meet
HP specifications.
Use media that meets HP specifications.
See
Media and trays.
The print-cartridge toner-level might be
low.
Replace the print cartridge. See Change
the print cartridge.
The wrong original was copied. The ADF might be loaded. Make sure that the ADF is empty.
Copies are reduced in size. The device software settings might be
set to reduce the scanned image.
See the device software Help for more
information about changing the settings.
226 Chapter 11 Problem solving ENWW