Filter
Top Products
Menu item Sub-menu item Sub-menu item Values Description
Print/Stop Test Continuous value
from 0 to 60,000
milliseconds. The
default is 0
milliseconds.
Isolate faults by stopping the device during
the print cycle and observing where in the
process the image degrades. To run the test,
specify a stop time. The next job that is sent
to the device will stop at the specified time in
the process.
Scanner Tests This menu item is used by a service
technician to diagnose potential problems
with the device scanner.
Control Panel LEDs Use this feature to make sure the
components of the control panel are
functioning correctly.
Display
Buttons
Touchscreen
Table 2-16 Troubleshooting menu (continued)
ENWW Use the Administration menu 53