Filter
Top Products
Windows 2000 Service Pack 3, Windows XP, Windows Server 2003,
Windows Server 2008, Windows Vista, or Windows 7
The print-ready file can be sent directly to the product by typing a copy command at a command
prompt or in an MS-DOS window.
1. At a command prompt, type copy /b <FILENAME> <PORTNAME>, where <FILENAME> is the
name of the print-ready file (including the path) and <PORTNAME> is the name of the appropriate
printer port (such as LPT1). For example, type the following:
C:\>copy /b c:\P3010FW.PDF lpt1
2. Press the Enter key on the keyboard.
NOTE: If the file name or path includes a space, you must enclose the file name or path in
quotation marks. For example, type C:\>copy /b "c:\My Documents\P3010FW.PDF". The
message Processing Job appears on the control panel, and the job prints.
3. Type exit at the command prompt, and then press the Enter key to close the command window.
Print-ready file printing in a Windows network
If the product is shared on a Windows network, complete the following steps.
1. From a command prompt or in an MS-DOS window, type copy /b <FILENAME> \
\<COMPUTERNAME>\<SHARENAME>, where <FILENAME> is the name of the print-ready file
(including the path), <COMPUTERNAME> is the name of the computer from which the product is
being shared, and <SHARENAME> is the product share name. For example, type the following:
C:\>copy /b c:\P3010FW.PDF \\your_server\sharename
NOTE: If the file name or path includes a space, you must enclose the file name or path in
quotation marks. For example, type C:\>copy /b "c:\My Documents\P3010FW.PDF" \
\your_server\sharename
2. Press the Enter key on the keyboard. The message Processing Job appears on the control
panel, and the job prints. The message 1 file(s) copied appears on the computer screen.
Print-ready file printing in UNIX systems
For UNIX systems, any command method that delivers the print-ready file to the product is acceptable,
including the following:
●
At the command prompt, type cp </home/yourmachine/FILENAME/ dev/parallel>,
where </home/yourmachine/FILENAME> is the location of the print-ready file.
Print-ready file printing by using the LPR command
NOTE: This direct printing method is for use in Windows 2000, Windows XP,
Windows Server 2003, Windows Server 2008, and Windows Vista.
ENWW
Printing print-ready documents
201