Filter
Top Products
Scanner Error <XX>. Turn off and then on.
Recommended action
●
Scanner error 12, Turn off then on
Motor test failure. This error will only appear on the Error report. The document-feeder motor is not
blocked from turning.
1. Clear any jammed paper from the document feeder.
2. Turn the product off, and then on.
3. If the error persists, replace the document-feeder scanner assembly.
●
Scanner error 13, Turn off then on
RAM Wall failure. This error appears on the control panel. The scanner motor or scanner module
is obstructed.
1. Turn the product off, and then on.
2. If the error persists, replace the document-feeder scanner assembly.
●
Scanner error 14, Turn off then on
LED test failure. This error will only appear on the Error report. The LED did not illuminate during
initialization.
◦
Replace the document-feeder scanner assembly.
●
Scanner error 17, Turn off then on
Scanner error. This error appears on the control panel. The scanner motor is obstructed.
◦
Replace the document-feeder scanner assembly.
Scanning Error. Cannot Connect.
Recommended action
If the error persists, replace the formatter.
Event log messages
Show an event log
NOTE: This tool is available only if you performed a full installation when you installed the product.
206 Chapter 6 Engineering details ENWW