Filter
Top Products
Engine Error. Press [OK].
Recommended action
If the error persists, replace the DC controller.
Jam in Area. Open Door and Clear Jam.
Recommended action
1. Verify the pickup roller, and separation roller are working correctly and not damaged. If
necessary, replace the rollers.
2. Verify that connector J116 on the DC controller is firmly seated.
Jam in Tray 1. Clear Jam and then Press [OK].
Recommended action
1. Clear the jam, and then follow the control panel instructions.
2. If the error persists, try the following solutions:
a. Verify the pickup roller and separation roller are working correctly. If necessary, replace the
rollers.
b. If the error persists during print jobs, verify that the connectors on DC controller are firmly
seated.
c. If the error persists during copy jobs, verify that the connectors on DC controller are firmly
seated.
d. Replace the product.
Load Paper
Recommended action
1. Replace the cassette (paper tray).
2. Verify that all eighteen DC controller connectors are firmly seated.
Print Failure. Press [OK].
Recommended action
1. Perform an NVRAM initialization.
2. Update the firmware.
3. Replace the formatter PCA.
ENWW
Tools for troubleshooting
205