Filter
Top Products
CAUTION:
If the SFP you does not have a bale, use a small implement, such as a
screwdriver , to press and release the trigger beneath the port. Non-baled
SFPs can be damaged by the removal process and are not recommended.
See SAN Swtich optional kits on p age 33 for a list of supported SFPs.
5. Repeat this procedure for the remaining ports, as required.
To install a replacement SFP:
1. Make sure that the bale is in the unlocked position, and then place the SFP in the
correctly oriented position on the port. See Figure 39.
NOTE:
Each SFP includes a 10- pad gold-plated PCB-edge connector on the
bottom. The correct position to insert an SFP into the upper row of ports is
withthegoldedgedown.ThecorrectpositiontoinsertanSFPintothe
lower row of ports is with the gold edge up .
2. Slide the SFP
into the port until you feel it click into place, and then close the bale.
SAN Switch installation guide
111