Filter
Top Products
Example 3:
switch:admin> tsclockserver
LOCL
switch:admin> tsclockserver 132.163.135.131
switch:admin>
Set the time zone
To set the time zone
:
1. Log in as admin.
2. Issue the following tstimezone command:
tstimezone[houroffset][minuteoffset]
• For Pacific Standard Time, enter tstimezone –8,0.
•ForMountainSt
andard Time, enter tstimezone –7,0.
• For Central Standard Time, enter tstimezone –6,0.
• For Eastern Standard Time, enter tstimezone –5,0.
The default ti
me zone for switches is Universal Time Conversion (UTC) , which is
eight hours ahead of Pacific Standard Time. The parameters listed do not apply
if the time zone of the switches has already been changed from the default (eight
hours ahead of PST).
See the tstimezone command in the Fabric OS command reference manual for
more detail
ed information about the command parameters.
3. Repeat step 1 and step 2 on all switches for which the time zone needs to be set.
Thetimezoneissetonlyonce;thevalueisstoredinnonvolatilememory.
For U.S. tim
ezones,Table 6 on page 63 provides the correct offset parameters for
the tstimezone command.
62
Installing and configuring SAN Switches