Filter
Top Products
Figure 14 As s embling the outer rails (HP System /e Rack)
5. Depending on the device model, the SAN Switch Rack Mount Kit requires different
screw types for securing the inner rails. Use Table 5 to determine the number and
screw type for your specific switch .
CAUTION:
Do not use any screws other than those provided. Using longer screws
than those provided can cause damage to internal components.
Table 5 Number of screws required to assemble the inner rails
SAN Switch
#8-32 x 5/16-inch screws #8-32 x 3/16-inch screws
2/32 N/A
12 (Six per rail)
4/8, 4/16
Ten (Five per rail)
N/A
4/32
Ten (Five per rail)
N/A
4/64
Ten (Five per rail)
N/A
4/32B
Six (Three per rail)
N/A
46
Installing and configuring SAN Switches