IBM XSERIES 220 Computer Hardware User Manual


 
Diagnostics 27
04 Error Explanation: Unable to bind to physical adapter.
Action: Reconfigure the adapter team by double-clicking
the PROSet icon in the control panel.
05 Error Explanation: Unable to initialize an adapter team.
Action: Reconfigure the adapter team by double-clicking
the PROSet icon in the control panel.
06 Informational Explanation: Team nn. Primary adapter is initialized.
Action: None.
07 Informational Explanation: Team nn. Secondary adapter is initialized.
Action: None.
08 Informational Explanation: Team nn. Virtual adapter or Team is
initialized.
Action: None.
09 Informational Explanation: Team nn. Primary adapter is switching over.
Action: None.
10 Warning Explanation: Team nn. Adapter link down.
Action: Make sure the adapter is functioning properly.
11 Informational Explanation: Team nn. Secondary adapter took over.
Action: None.
12 Warning Explanation: Team nn. Secondary adapter is deactivated
from the Team.
Action: Make sure the secondary adapter is functioning
properly and that the adapter cable is securely connected
to the LAN.
13 Informational Explanation: Team nn. Secondary adapter has rejoined
the Team.
Action: None.
14 Informational Explanation: Team nn. Secondary adapter link is up.
Action: None.
15 Error Explanation: Team nn. The last adapter has lost its link.
Network connection has been lost.
Action: Shut down the server and replace the adapters;
then, restart the server to reestablish the connection.
16 Informational Explanation: Team nn. An adapter has re-established the
link. Network connection has been restored.
Action: None.
17 Informational Explanation: Team nn. Preferred primary adapter has
been detected.
Action: None.
18 Informational Explanation: Team nn. Preferred secondary adapter has
been detected.
Action: None.
19 Informational Explanation: Team nn. Preferred primary adapter took
over.
Action: None.
20 Informational Explanation: Team nn. Preferred secondary adapter took
over.
Action: None.
Event ID Type Description
Table 6. NDIS (Windows NT or Windows 2000) driver teaming messages for the
Ethernet controller.