Filter
Top Products
44 Hardware Maintenance Manual: xSeries 220
7. Remove the front door and bezel assembly.
a. Grasp the end of the blue bezel-release lever inside of the system; then, move
the lever forward to release the front door and bezel assembly.
Figure 3. Removing the front door and bezel assembly
b. Swing the assembly away from the front of the system; then, lift the front
door and bezel assembly out of the tab openings on the bottom of the system
and store the assembly for possible future use.
8. Carefully turn the system open-side up on a flat surface; then, remove the four
feet from the system.
a. If the front feet on the system do not already face outward, rotate them as
shown below: