Filter
Top Products
84 Hardware Maintenance Manual: xSeries 220
Note: If you removed the support bracket assembly after you removed the cover,
reinstall it before you install the cover.
To install the server left-side cover:
1. Clear any cables that might impede the replacement of the cover.
2. Align the bottom tabs of the side cover with the matching slots in the server
chassis; then, insert the tabs into the slots.
3. Close the cover-release latch to pull the cover forward and lock the cover in place.
4. Make sure that the stabilizing feet are rotated outward so that they properly
support the server.
5. Reconnect the external cables and cords to the server; then, plug the power cords
into electrical outlets.
Connecting external options
You can attach a SCSI storage expansion enclosure to the server if you install an
optional SCSI adapter in one of the five PCI adapter slots on the system board.
Installation procedure
To attach an external device, do the following: