Filter
Top Products
User Manual 121
English
1 Set whether TCP/IP is used.
2 Enter the IP Address in the format: “###.###.###.###”.
3 Check the boxes if the address is to be acquired from RARP
or DHCP/ BOOTP.
4 Enter the subnet mask in the format: “###.###.###.###”.
5 Enter the gateway address in the format: “###.###.###.###”.
If you do not use a router or gateway, enter “0.0.0.0”.
6 Enter the ROOT Password.
NetWare setup screenTCP/IP setup screen
Enter the printer name, frame type, operating mode, NetWare
port name, etc.
7100e+.p65 25/08/99, 20:54 PM121